For use only with Windows driver version 8. For use with SCSI miniport drivers only. QLA Windows Miniport driver. Warranty One year limited warranty. Fibre Channel is one of the most deployed storage connectivity solutions in the enterprise data centers and is one of the most prevalent method of storage connectivity. Operating environment The adapters are supported in the following environment:

Drivers & software HP Firmware Online Flash for QLogic Fibre Channel Host Bus Adapters - Windows 2008/2012 (x64). The HP supplied QLogic driver must be installed prior to this firmware component being identified by HP SUM for deployment. Gen 5 Fibre Channel Host Bus Adapter: UEFI.

Overview Fibre Channel is one of the most deployed qlogic hba connectivity solutions qlogic hba the enterprise data centers and is one of the most prevalent method of storage connectivity. Related product families Product families related to this document are the following: Your Email Address optional.

For the latest information about the specific versions and service packs supported, see the ServerProven website at: Article Networking, Storage 24 found this helpful Created: Related product families Product families related to this document are qlogic hba following: Full hardware offload for Fibre Channel protocol. Multi-boot image for 4Gb Adapters.

Cavium/QLogic – Semiconductor Solutions and Server Innovation

Part number information Features Specifications Server support. The Critical Path to App-aware Infrastructure As virtual environments scale, qlogic hba how each virtual machine impacts the underlying infrastructure becomes a necessity for efficient data center design and timely issue diagnosis. Used only qlogic hba SCSI miniport drivers.

Agency approvals The adapter conforms to the following standards: Robust design, reliability and high availability Deterministic, high performance with port isolation Simplified management Rapid server deployment and orchestration Support for major commercially available OS flavors Software for Advanced Configuration and Management QLogic Qlogic hba 6 and Gen 5 adapters include StorFusion technology for advanced SAN fabric management and performance, designed to improve network resiliency, enhance diagnostic and troubleshooting capabilities, quicken SAN deployment, and improve quality of service QoS.

QLogic 16Gb FC Single-port and Dual-port HBAs for System x Product Guide > Lenovo Press

This driver package is compatible with SANsurfer 2. Unleash the full potential of high-density server virtualization, cloud architectures and flash storage: Management tool graphical user interface for use on all Windows drivers. At times it might be necessary to verify the QLogic Fibre Channel card model that is installed on your XenServer for troubleshooting purposes.

Single- or dual-port adapter meets the Fibre Channel and Ethernet connectivity needs in cloud-enabled data centers. Find the dmesg file qlogic hba in the system status report or bugtool.

WIN Driver Package. The Performance and Efficiency of Gen 6 32Gb Fibre Channel Qlogic hba database applications and improve qlogic hba efficiency in all-flash deployments.

QLogic Enhanced Gen 5 Delivers Exceptional Value Cavium leads the competition with superior qlogic hba, lower power, higher qloigc, and investment protection. Support for servers with Intel Xeon v3 processors Table 2.

Warranty Review warranty information for specific products. Getting Started QConvergeConsole is an enterprise-class, web-based, single-pane-of-glass console that allows for centralized management and configuration of the broad qlogid line of QLogic adapters unified across qlogic hba entire data center network, qlogic hba LAN and SAN. Dimensions and weight approximate: Right choices for the Enterprise Data Centers Watch the replay to learn about decisions that enterprise customers are making for selecting Fibre Channel or Qlogic hba storage.

Javascript is disabled in your browser. QConvergeConsole is an enterprise-class, web-based, single-pane-of-glass console that allows for centralized management and configuration of the broad product line of QLogic adapters unified across the entire data center network, qlogic hba LAN and SAN.

This eliminates the qlogic hba to change your organizational structure as you converge your network.

This improves reliability in provisioning SANs and reduces the time required to troubleshoot faulty connections. This article qlotic translated by an automatic translation system and was not reviewed by people. Operating environment The adapter is supported in qlogic hba following environment: Part number information Features Qlogic hba specifications Server support.

Read the paper to learn about decisions that enterprise customers are making for using hyper-converged storage.

After you have completed the hardware installation and powered on the computer, follow the instructions in this chapter for your operating system to install the HBA driver and any other utilities required for the installation.

This chapter contains the following topics:

Installing Software for the Solaris OS

This section contains the following topics:

Installing the Fibre Channel Driver

The qlc HBA driver for the Solaris OS is included with the Solaris 10 8/07 (s10u4) OS release; no further action is required. The latest version of the qlc driver is included with the following Solaris patches:

• 125165 (for the x64/x86 platform)
• 125166 (for the SPARC platform)

You can download these patches from the SunSolve website at:

1. Log in as the root user.

2. Navigate to the directory that contains the patch.

3. Add the latest patch by using the patchadd command.

Installing the Ethernet Driver

Check the SunSolve web site to ensure that you have the latest patch clusters and security patches for the ethernet driver. You can download the latest patch clusters and security patches at:

Diagnostic Support for the Solaris OS

Diagnostic support for the HBA is included in the SunVTS software beginning with version 6.3. The SunVTS software is included with the Solaris 10 8/07 (s10u4) OS. The SunVTS software is also available for download at: http://www.sun.com/oem/products/vts

The qlctest utility, which is provided as part of the SunVTS software, supports the following functions:

• Connectivity verification
• Firmware version and checksum testing
• Self-testing
• Loopback tests
• External
• Internal, single-bit
• Internal, 10-bit
• Mailbox

Installing Software for the Red Hat/SUSE Linux OS

This section describes how to download and install the fibre channel and ethernet drivers required by the HBA. It also describes how to install diagnostic support software for the HBA. This section contains the following topics:

Downloading the Red Hat/SUSE Linux Drivers

This section describes how to download the fibre channel and ethernet driver for the HBA. This section contains the following topics:

1. Go to the QLogic support site for Sun Microsystems at:

2. Locate the table containing the SG-XPCIE2FCGBE-Q-Z model.

3. At the bottom of the table, in the Software for row, click Linux.

4. In the Red Hat or SUSE Linux table, find the appropriate driver (the file name is in the format qla2x00-vx.yy.zz-dist.tgz).

5. In the Download column of that row, click Download.

6. Save the file to a directory on the hard disk of the computer.

1. Go to the QLogic support site for Sun Microsystems at:

2. Locate and click the link for the Ethernet drivers.

3. Find and select the Go to Download Center link.

4. Type 82571EB in the search window and select search.

5. Locate and select Intel 82571EB Gigabit Ethernet Controller.

6. Using the drop-down menu, either select the individual OS or All Operating Systems, then click Go!.

Individual software downloads are now available.

7. Download and save the driver on the hard disk of the computer.

Installing the Red Hat/SUSE Linux Drivers

After you download the drivers, as described in Downloading the Red Hat/SUSE Linux Drivers, you can install the drivers by following the steps in this section:

1. To Build the Fibre Channel Driver

2. To Load the Newly Built Fibre Channel Driver

3. To Build and Load the Ethernet HBA Driver

The driver installation makes extensive use of the build.sh script, which is located in driver source (extras/build.sh).

From the source code, you can build a qla2xxx.ko module and a qla2xxx_conf.ko module for the host. You can then choose to load the driver manually or automatically, as described in To Load the Newly Built Fibre Channel Driver.

1. In the directory that contains the source driver file, qla2xxx-x.yy.zz-dist.tgz, use the commands shown in the following example.

2. Build and install the driver modules from the source code by executing the build.sh script.

This build script does the following:

• Builds the driver .ko files.
• Copies the .ko files to the appropriate directory:
  /lib/modules/2.6../kernel/drivers/scsi/qla2xxx
• Adds the appropriate directive in the modprobe.conf.local to remove the qla2xxx_conf module when unloading the qla2xxx module.
• Updates the newly built qla2xxx_conf.ko module with any previously saved data in /etc/qla2xxx.conf.

3. Choose how you want to load the driver, as described in To Load the Newly Built Fibre Channel Driver.

After you build the fibre channel driver, as described in To Build the Fibre Channel Driver, you can choose to manually or automatically load the driver. This section contains the following topics:

After building the fibre channel driver, you can choose to manually load the driver. If you want to automatically load the driver, skip to To Automatically Load the Fibre Channel Driver.

1. Build the driver binary, as described in To Build the Fibre Channel Driver.

2. Manually load the driver by using the modprobe -v command.

3. Now that the fibre channel driver is manually loaded, you can build and load the ethernet driver, as described in To Build and Load the Ethernet HBA Driver.

4. If you want to manually unload the driver, use the modprobe -r command.

After building the fibre channel driver, you can choose to automatically load the driver. If you want to manually load the fibre channel driver, see To Manually Load the Fibre Channel Driver.

1. Build the driver binary, as described in To Build the Fibre Channel Driver.

2. Install the driver module (*.ko) files to the appropriate kernel module directory.

3. For Red Hat Linux users, edit the /etc/modprobe.conf file and add the following entries, if they are not present:

• alias scsi_hostadapter1 qla2xxx_conf (for use only with SANsurfer)
• alias scsi_hostadapter2 qla2xxx

4. For SUSE Linux users, edit the /etc/sysconfig/kernel file and modify the INITRD_MODULES directive as shown in the following example.

In this example, note that you must add the first module, qla2xxx_conf (for SANsurfer), followed by the qla2xxx module. The qla2xxx_conf module is for use only with SANsurfer while the qla2xxx module is a common module.

5. Change to the /boot directory.

6. Back up the current RAMDISK image.

7. Build the RAMDISK image with the mkinitrd -f command.

8. Dell vostro 1720 drivers. Reboot the system to load the RAMDISK image with the driver.

9. You can now build and load the ethernet driver, as described in To Build and Load the Ethernet HBA Driver.

1. Build the Ethernet HBA driver.

2. Change to the rpm directory.

3. Install the Ethernet rpms, using the same command for both Red Hat and SUSE OSes.

4. Use the depmod command to register the HBA.

5. Manually load the e1000 driver for all instances.

Diagnostic Support for the Red Hat/SUSE OS

Diagnostic support for the HBA is available through the SANsurfer PRO graphical user interface (GUI) utility or the SANsurfer command-line interface (CLI) utility. These utilities support the following functions:

• Connectivity verification
• BIOS, FCode, EFI, and firmware version information
• Link status, including topology, data rate, and statistics
• Vital product data (VPD) information
• Attached devices list
• Option ROM, NVRAM update utilities
• Loopback test
• Read/Write Buffer test

1. Go to the QLogic support site for Sun Microsystems at:

2. Locate the table containing the SG-XPCIE2FCGBE-Q-Z model.

3. At the bottom of the table, click Windows.

4. Locate the SANsurfer CLI (command-line interface) or SANsurfer PRO (GUI) diagnostic utility.

5. Click Download to copy diagnostic archive to a local file system.

6. Click Readme link for additional information.

Installing Software for the VMware Technology

The HBA drivers included on the VMware distribution are sufficient for supporting the HBA. No further action is required.

To verify that the drivers loaded successfully, look for the following lines in the /var/log/vmkernel file:

The first line indicates that the fibre channel driver loaded successfully. The second line indicates that the ethernet driver loaded successfully.

Installing Software for the Windows OS

This section describes how to download and install the fibre channel and ethernet drivers required by the HBA. It also describes how to install diagnostic support software for the HBA. This section contains the following topics:

1. Go to the QLogic support site for Sun Microsystems at:

2. Locate the table containing the SG-XPCIE2FCGBE-Q-Z model.

3. At the bottom of the table, in the Software for row, click Windows.

4. In the table for your Windows operating system, find the appropriate driver.

5. In the Download column of that row, click Download.

6. Save the file to a directory on the hard disk of the computer.

7. Unzip (extract) the driver files to a location on the hard disk of the computer.

After installing the HBA and restarting the computer, the Windows OS detects the newly installed device and displays the Found New Hardware with Fibre Channel Controller message. The Found New Hardware wizard launches.

1. On the first screen of the Found New Hardware wizard, click Search for a suitable driver for my device (recommended), and then click Next.

2. Browse to the location on the where you downloaded the Fibre Channel driver, then click Next.

Windows displays a message, letting you know it found a driver for this device.

3. On the Completing the Found New Hardware Wizard window, click Finish.

4. If the system displays the following message, click Yes to restart the computer:

1. Go to the QLogic support site for Sun Microsystems at:

2. Locate and click the link for the Ethernet drivers.

3. Find and select the Go to Download Center link.

4. Type 82571EB in the search window and select search.

5. Locate and select Intel 82571EB Gigabit Ethernet Controller.

6. Using the drop-down menu, select either the individual OS or All Operating Systems, then click Go!.

Individual software downloads will now be available.

7. Download and save the driver on the hard disk of the computer.

8. Navigate to the location on the hard disk where you downloaded the driver, and run the driver file.

The driver file is a self-extracting archive. When you run the file, the files are extracted to a temporary directory and the installation wizard is run to install the driver. After the driver is installed, the temporary files are removed.

Diagnostic Support for the Windows OS

Diagnostic support for the HBA is available through the SANsurfer PRO GUI utility or the SANsurfer CLI utility. These utilities support the following functions:

• Connectivity verification
• BIOS, FCode, EFI, and firmware version information
• Link status, including topology, data rate, and statistics
• Vital Product Data (VPD) information
• Attached devices list
• Option ROM, NVRAM update utilities
• Loopback test
• Read/Write Buffer test

1. Go to the QLogic support site for Sun Microsystems at:

2. Locate the table containing the SG-XPCIE2FCGBE-Q-Z model.

3. At the bottom of the table, click Windows.

4. Locate the SANsurfer CLI or SANsurfer PRO (GUI) diagnostic utility.

5. Click Download to copy the diagnostic archive to a local file system.

6. Click Readme for additional information.

Installing a CLI for Updating the BIOS and FCode

If you need to update the fibre channel BIOS and FCode, you can do so by using the SANsurfer command-line interface (CLI).

If you have not done so already, you can download the SANsurfer CLI package from the QLogic support site for Sun Microsystems at:

Follow the installation instructions in the README.TXT file. Installation instructions are also available in the QLogic document, SANsurfer FC HBA CLI User’s Guide (SN0054614-00), which can be found on the QLogic web site,

For instructions on how to update the BIOS and FCode, see the SANsurfer FC HBA CLI User’s Guide at the QLogic web site.

Copyright © 2008, Sun Microsystems, Inc. All Rights Reserved.